Service Type | Equipment Used | Specification |
| | |
30", 26" & 24" CONDUCTOR | 30" CASING TONG | MODEL CLE 30,000 HYD P/TONG W/ 30" JAWS MAX - 18-5/8" MIN TORQUE 90,000 FT. LB. |
| BOWL AND 200 T SLIPS | 200 TON BR TYPE 30" CASING SPIDER & BR TYPE 30" UC-3 CASING SLIP |
| CASING CLAMP | VARCO TYPE "C" 39" SAFETY CLAMPS |
| 150 T SIDE DOOR ELEVATOR | B&V 250 TON TYPE SDS SLIDE DOOR ELEVATOR 90 DEGREE TYPE |
| MANUAL TONGS | TYPE BJ EXTENDED B TONG FOR 30" CASING |
20" CASING | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, POWER UNIT |
| HYDRAULIC POWER TONG | MODEL KT 20,000 HYD POWER TONG WITH 20" JAWS. MAX TORQUES 75,000 FT/LB. |
| CASING CLAMP | TYPE CXL SAFETY CLAMPS, 20 SEGMENT |
| 150 T SIDE DOOR ELEVATOR | TYPE SDS 150/5 150 TON CAPACITY SIDE DOOR ELEVATOR |
| MANUAL TONG | TYPE BV 55C MANUAL CASING TONG TORQUES 25,000 FT/LB. |
| HANDSLIPS | AOT TYPE CMS-XL ROTARY CASING SLIPS |
| SINGLE JOINT ELEVATOR | TYPE SJS SINGLE JOINT CENTER LATCH ELEVATOR 90 DEGREE TYPE |
| BJ VARCO 500 TON SPIDER / ELEVATOR DRESSED FOR 20" | TYPE BJ 500 TON SPIDER / ELEVATOR (12-3/4" ~ 24-1/2") |
13-3/8" CASING | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, POWER UNIT |
| HYDRAULIC POWER TONG | MODEL LW 13375 HYD POWER TONG W/ 13-3/8 JASW MAX. TORQUE 20,000 FT/LB |
| 150 T SIDE DOOR ELEVATOR | AOT TYPE SLX 150 TON SIDE DOOR ELEVATOR |
| HANDSLIPS | AOT TYPE CMS-XL CASING ROTARY HAND SLIPS |
| SINGLE JOINT ELEVATOR | B&V TYPE SJS SINGLE JOINT CENTER LATCH ELEVATOR 90 DEGREE TYPE |
| 350 T SPIDER & ELEVATOR | 350 TON AIR OPERATED BJ SLIP TYPE SPIDER ELEVATOR FOR 13-3/8 CASING |
| 500 TON SPIDER / ELEVATOR DRESSED FOR 13-3/8" | B&V TYPE BUS/E-500 BODY ASSEMBLY (14" ~ 4-1/2") |
| CASING CLAMP | TYPE CXL SAFETY CLAMPS |
| FMS 375-495 DRESSED FOR 13-3/8" | FMS 375 FLUSH MOUNTED SPIDER & BODY ASSEMBLY (14" ~ 4-1/2") |
| BJ VARCO 500 TON SPIDER / ELEVATOR DRESSED FOR 13-3/8" | TYPE BJ 500 TON SPIDER / ELEVATOR (4-1/2" ~ 14") |
9-5/8" CASING | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, POWER UNIT |
| HYDRAULIC POWER TONG | MODEL LW 13375 HYD POWER TONG W/ 9-5/8 JASW MAX. TORQUE 20,000 FT/LB |
| 150 T SIDE DOOR ELEVATOR | AOT TYPE SLX 150 TON SIDE DOOR ELEVATOR |
| HANDSLIPS | AOT TYPE CMS-XL CASING ROTARY HAND SLIPS |
| SINGLE JOINT ELEVATOR | B&V TYPE SJS SINGLE JOINT CENTER LATCH ELEVATOR 90 DEGREE TYPE |
| 350 T SPIDER & ELEVATOR | 350 TON AIR OPERATED BJ SLIP TYPE SPIDER ELEVATOR FOR 9-5/8 CASING |
| THREAD PROTECTOR (KLEPO) | KLEPO AIR OPERATED TYPE HDH INFLATABLE THREAD PROTECTOR |
| CASING CIRCULATING / FILL UP SYSTEM | FILL-UP & CIRCULATOR DEVICE, DUAL CUP TYPE W/ MUD SAVER VALVE RATE OFCIRCULATING 5000-PSI |
| CASING CLAMP | TYPE CXL SAFETY CLAMPS |
| FMS 375-495 DRESSED FOR 9-5/8" | FMS 375 FLUSH MOUNTED SPIDER & BODY ASSEMBLY (14" ~ 4-1/2") |
| 500 TON SPIDER / ELEVATOR DRESSED FOR 9-5/8" | B&V TYPE BUS/E-500 BODY ASSEMBLY (14" ~ 4-1/2") |
7" LINER | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD. POWER UNIT |
| HYDRAULIC POWER TONG | MODEL LW 13375 HYD POWER TONG W/ 7" JASW MAX. TORQUE 20,000 FT/LB |
| 150 T SIDE DOOR ELEVATOR | AOT TYPE SLX 150 TON SIDE DOOR ELEVATOR |
| HANDSLIPS | AOT TYPE CMS-XL CASING ROTARY HAND SLIPS & BJ SDXL TYPE |
| SINGLE JOINT ELEVATOR | B&V TYPE SJS SINGLE JOINT CENTER LATCH ELEVATOR 90 DEGREE TYPE |
| THREAD PROTECTOR (KLEPO) | KLEPO AIR OPERATED TYPE HDH INFLATABLE THREAD PROTECTOR |
| CASING CLAMP | TYPE CXL SAFETY CLAMPS |
| STABBING GUIDE | KLEPO STABBING GUIDES |
| CASING CIRCULATING / FILL UP SYSTEM | FILL-UP & CIRCULATOR DEVICE, DUAL CUP TYPE W/ MUD SAVER VALVE RATE OFCIRCULATING 5000-PSI |
| FMS 375-495 | FMS 375 FLUSH MOUNTED SPIDER & BODY ASSEMBLY (14” ~ 4-1/2”) |
5-1/2", 5" & 4-1/2" CASING LINER | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, P/UP |
| HYD POWER TONG C/W BACKUP | MODEL CLE 5500 UHT CLINCHER W/ BACKUP TONG MAX TORQUE 20,000 FT/LB |
| 150 T SIDE DOOR ELEVATOR | TYPE SLX 150 TON SIDE DOOR ELEVATOR |
| HANDSLIPS | BJ TYPE SDXL ROTARY HAND SLIPS AND OR AOT DU LONG 4-1/2 ROTARY SLIPS |
| SINGLE JOINT ELEVATOR | TYPE SJS SINGLE JOINT CENTER LATCH ELEVATOR 5 TON CAPACITY |
| SAFETY CLAMP | TYPE "T" BAASH-ROSS 6 LINKS WITH WRENCH |
| STABBING GUIDE | KLEPO STABBING GUIDE |
| COMPUTERIZED TORQUE TURN (ZONE 2) | CONTECT MODEL CT3000 POP-UP SOFTWARE TORQUE TURN COMPUTER WITH REMOTE DUMP VALVE |
| CONTROLLED MAKEUP SYSTEM | RPM CONTROL VALVE INTEGRATED TO THE TONG FROM 0-10 RPM |
3-1/2" TUBING LINER | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, P/UP |
| HYD POWER TONG C/W HYD BACKUP | MODEL CLE 5500 UHT TONG W/ BACKUP & 500C H/K W/ CLINCHER BACKUP TONG |
| 150 T SIDE DOOR ELEVATOR | TYPE SLX 150 TON SIDE DOOR ELEVATOR |
| HANDSLIPS | BJ TYPE SDXL & SDML ROTARY HAND SLIPS |
| SINGLE JOINT ELEVATOR | TYPE SJS SINGLE JOINT ELEVATOR 90 DEGREE TYPE |
| SAFETY CLAMP | TYPE "T" BAASH-ROSS SAFETY CLAMPS WITH 5 LINKS AND WRENCH |
| STABBING GUIDE | KLEPO STABBING GUIDE |
| COMPUTERIZED TORQUE TURN (ZONE 2) | MODEL CT3000 POP-UP SOFTWARE TORQUE TURN COMPUTER WITH REMOTE DUMP VALVE |
| CONTROLLED MAKEUP SYSTEM | RPM CONTROL VALVE INTEGRATED TO THE TONG FROM 0-10 RPM |
2-7/8" TUBING LINER | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, P/UP |
| HYD POWER TONG C/W HYD BACKUP | MODEL CLE 5500 UHT TONG W/ BACKUP & 500C H/K W/ CLINCHER BACKUP TONG |
| 75 T YT ELEVATOR | TYPE 75 TON BJ SLIP TYPE ELEVATOR WITH ONE SET OF 2-7/8" SIZE |
| HANDSLIPS | TYPE SDML ROTARY HAND SLIPS 2-7/8" SIZE |
| SINGLE JOINT ELEVATOR | TYPE SJS SINGLE JOINT ELEVATOR |
| SAFETY CLAMP | TYPE "T" BAASH-ROSS SAFETY CLAMPS WITH 4 LINKS AND WRENCH |
| STABBING GUIDE | KLEPO STABBING GUIDE |
| COMPUTERIZED TORQUE TURN (ZONE 2) | MODEL CT3000 POP-UP SOFTWARE TORQUE TURN COMPUTER WITH REMOTE DUMP VALVE |
| CONTROLLED MAKEUP SYSTEM | RPM CONTROL VALVE INTEGRATED TO THE TONG FROM 0-10 RPM |
7" / 4-1/2" TUBING | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, P/UP |
| HYD POWER TONG DRESSED 7"/ 5"/ 4-1/2"/ C/W INTEGRAL BACKUP | 7-5/8" UHT CASING POWER TONG ECKEL WITH TRI GRIP BACKUP TONG CAPACITY 2-3/8" - 7-5/8" |
| 7" 75 T SLIP TYPE ELEVATOR | 75 TON BJ SLIP TYPE ELEVATOR WITH 7" SLIP ASSEMBLY |
| 7" 150 T SIDE DOOR ELEVATOR | 150 TON BJ SLIP TYPE ELEVATOR WITH 7" SLIP ASSEMBLY |
| 7" HANDSLIPS | 7" SDXL TYPE ROTARY HAND SLIPS |
| 7" SINGLE JOINT ELEVATOR | 7" SJS TYPE SINGLE JOINT CENTER LATCH ELEVATOR 5 TON CAPACITY |
| 7" THREAD PROTECTOR (KLEPO) | 7" KLEPO AIR OPERATED THREAD PROTECTOR |
| 7" STABBING GUIDE | 7" STABBING GUIDE |
| 5" 75 T SLIP TYPE ELEVATOR | 75 TON BJ SLIP TYPE ELEVATOR WITH 5" SLIP BODY |
| 5" SINGLE JOINT ELEVATOR | 5" TYPE SJS SINGLE JOINT CENTER LATCH ELEVATOR 5 TON CAPACITY |
| 5" HANDSLIPS | 5" DU LONG ROTARY HAND SLIPS |
| 4-1/2" 75 T SLIP TYPE ELEVATOR | 75 TON BJ SLIP TYPE ELEVATOR WITH 4-1/2" SLIP BODY |
| 4-1/2" HAND SLIPS | 4-1/2" SDXL BJ TYPE AND AOT DU LONG 4-1/2 ROTARY HAND SLIPS |
| 4-1/2" SINGLE JOINT ELEVATOR | 4-1/2" TYPE SJS SINGLE JOINT ELEVATOR 5 TON CAPACITY |
| 4-1/2" SAFETY CLAMP | BAASH-ROSS TYPE T SAFETY CLAMPS |
| 4-1/2" STABBING GUIDE | 4-1/2 KLEPO STABBING GUIDE |
| COMPUTERIZED TORQUE TURN (ZONE 2) | MODEL CT3000 POP-UP SOFTWARE TORQUE TURN COMPUTER WITH REMOTE DUMP VALVE |
| CONTROLLED MAKEUP SYSTEM | RPM CONTROL VALVE INTEGRATED TO THE TONG FROM 0-10 RPM |
4-1/2" TUBING | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, P/UP |
| HYD POWER TONG C/W INTEGRAL BACKUP | 4-1/2" CLINCHER POWER TONG TYPE HUT W/ BACKUP TONG TORQUE 20,000 FT/LB |
| 75 TON BJ SLIP TYPE ELEVATOR WITH 4-1/2" SLIP BODY | 4-1/2" 75 T SLIP TYPE ELEVATOR |
| 4-1/2" HAND SLIPS | 4-1/2" SDXL BJ TYPE AND AOT DU LONG 4-1/2 ROTARY HAND SLIPS |
| 4-1/2" SINGLE JOINT ELEVATOR | TYPE SJS B&V SINGLE JOINT CENTER LATCH ELEVATOR 5 TON CAPACITY |
| 4-1/2" SAFETY CLAMP | TYPE "T" SAFETY CLAMPS |
| 4-1/2" STABBING GUIDE | 4-1/2 KLEPO STABBING GUIDE |
| COMPUTERIZED TORQUE TURN | MODEL CT3000 POP-UP SOFTWARE TORQUE TURN COMPUTER WITH REMOTE DUMP VALVE |
| CONTROLLED MAKEUP SYSTEM | RPM CONTROL VALVE INTEGRATED TO THE TONG FROM 0-10 RPM |
| 5" 75 T SLIP TYPE ELEVATOR | 75 TON BJ SLIP TYPE ELEVATOR WITH 5" SLIP BODY |
| 5" HANDSLIPS | 5" AOT DU LONG ROTARY HAND SLIPS |
| 5" SINGLE JOINT ELEVATOR | B&V TYPE SJS SINGLE JOINT ELEVATOR 5 TON CAPACITY |
3-1/2" TUBING - 2-7/8” TUBING - 2-3/8” TUBING | HYD. POWER UNIT | 65 GPM AT 2500 PSI FOR ZONE II DIESEL HYD, P/UP |
| HYD. POWER TONG C/W INTEGRAL BACKUP | 3-1/2" H/K 500C W/ BACKUP TONG & CLINCHER 5-1/2 FOR 3-1/2 TUBING |
| 75 T SLIP TYPE ELEVATOR | 75 TON BJ SLIP TYPE ELEVATOR DRESSED FOR 3-1/2" TUBING |
| HAND SLIPS | 4-1/2" SDML BJ TYPE AND 3-1/2 DU LONG ROTARY HAND SLIPS |
| SINGLE JOINT ELEVATOR | 3-1/2 TYPE SJS SINGLE JOINT CENTER LATCH ELEVATOR 5 TON CAPACITY |
| SAFETY CLAMP | BAASH-ROSS TYPE "T" SAFETY CLAMPS |
| STABBING GUIDE | 3-1/2 KLEPO STABBING GUIDE |
| COMPUTERIZED TORQUE TURN | MODEL CT3000 POP-UP SOFTWARE TORQUE TURN COMPUTER WITH REMOTE DUMP VALVE |
| CONTROLLED MAKEUP SYSTEM | RPM CONTROL VALVE INTEGRATED TO THE TONG FROM 0-10 RPM |
OTHER EQUIPMENT | POWER UNIT FOR ZONE 2 USAGE | DIESEL 6 CYLINDER POWER UNIT, SKID MOUNTED DUETZ ENGINE F6L-912 WITH AUTOMATIC SHUTDOWN, CHECK VALVE |
| COLD CUTTER FOR 20" AND 13-3/8" CASING (ZONE 2) | MODEL CTO CUTTING MACHINE: SIZE 01"- 36" CAPACITY, COMPLETE WITH CLAMPING JAWS, TOOL HOLDER |
| PNEUMATIC AIR OPERATED HYDRAULIC TORQUE WRENCH | TORQUE WRENCH HEXAGONAL CASSETTE COMPLETE W/HYDRAULIC PUMP ENABLE TO MAKE UP OR BRAKE OUT NUTS FOR B |
| DUAL ELEVATOR & SPIDER AIR-OPERATED | 400 TON BILCO AIR-OPERATED ELEVATOR AND SPIDER BOWL TO RUN A DUAL COMPLETION STRING SIZES 4-1/2, 3-1 |
| DRIFTS ALL SIZES | - |
| STABBING GUIDES | - |
| THREAD PROTECTOR ALL SIZES | - |
| THREAD COMPOUND | - |
| THREAD LOCKING COMPUTER | - |
| GAS TESTING UNIT RATED AT 15,000 PSI W/TEST PUMP, AIR COMPRESSOR, AIR STARTER W/ACCESSORIES, CONTROL | 4 CYLINDER GAS TEST RATED AT 15,000 PSI FOR M/UP GAS (HE, N2) SUB-ASSEMBLY |
MISCELLANEOUS TOOLS | SKID MOUNTED HIGH PRESSURE WATER JETTING COMPLETE WITH CONTROL GUN ACCESSORIES | HIGH PRESSURE WATER JETTING MACHINE, COMPLETE WITH GA 150 PUMP MANUFACTURED BY AQUA-DYNE, RATED 4000 |
| 8-5/8" BUCKING UNIT COMPLETE -b) 11-3/4" TYPE II MODEL CLEBU 1175-21 | HORIZONTAL BUCKING UNIT SKID MOUNTED ENABLE TO M/UP OR BRAKE OUT TUBULAR SUB-ASSEMBLY FROM 11-3/4" |
| 15,000 PSI PRESSURE TEST UNIT | SKID MOUNTED HIGH PRESSURE TESTS UNIT COMPLETE WITH HIGH PRESSURE HASKEL PUMP, CHART RECORDER |
| STAB-MASTER EQUIPMENT (PIPE ALIGNMENT TOOL - PAT) | MOUNTED ON DERRICK BEAM (BOLTED), PAT COMPLETE WITH CONTROL PANEL TO OPERATE THE TOOLS, PNEUMATIC |
